Bizator  /  Adverts  /  package and packing, equipment  /  packaging material and equipment

OST "the Director Astrahan" packing machine Pneumatic-400 for packaging food and non-food products in 3 suture packages

Offer type: salePublished: 23.01.2017
Seller:Gerasimenko Sergej Viktorovich
Show phone
Write a message
Address:Ukraine, Chernivets'ka Oblast', Chernivtsi
Purpose: For automatic filling and packing in 3 suture packages from a roll of heat-sealing film.
Products: Engineering, fine and srednerynochnye, melodyssey, non-fragile: Cereals, poppy seeds, Sugar, Salt, Supplements pellets, bath Salt, Coffee 2-in-one and 3-in-one Coffee rastvorimy granulated Tea, chopped, granulated, pet Food, Toilets for Pets, animal Feed, sunflower Seeds, dried crusts, Fertilizer pellets.
Easy and srednesutochnye, medium and krupnosemyannye, melodyssey, the average fragility: Legumes, short-cut Pasta, Frozen chopped vegetables, Sweets, small, pills without wrappers, Coffee beans, loose leaf Tea, dry Seeds, Corn wand short-cut, large Nuts, small Nuts, Popcorn, pumpkin Seeds, Croutons, Dried fruit.
Krupnosemyannye, small, hard-running materials, the average brittle and very fragile: Dumplings, Dumplings, bulk Toys, Candy wrapper, onion Seeds, charcoal, Biscuits, Cakes, Crackers.
Paleogene, fine-grain with a high content of dust: Starch, Flour, Sugar powder, Supplements powder, washing Powder and other powder detergents, Coffee powder, cream powder, milk Powder, Food for fish, Fertilizer powder, Dry mixes, plaster, cement.
Viscous, paste-like, with small non-abrasive inclusions: Shampoo and other liquid household products, condensed Milk, Jams, Ketchups, sauces, Honey
Packaging materials: Canvas roll - film single and double sided heat-sealable polypropylene (BOPP) transparent, pearlescent, metallic laminates, triplexes, laminated paper
Packing design: Cushion with two transverse and one longitudinal middle seam. Installed options - "standing" package, the punched hole for hanging on a hook, punching holes for fingers.
Working principle: the Film is unwound from the roll, passes through the shaft tensioner, through the control zone photo tags, via the node bactericidal treatment (option), through the zone of the date below thermal transfer printer (option). On the collar shaper flat film rolled in a tube. Propivaetsya longitudinal/middle seam. Further, the horizontal node sponges prepaymet film two transverse seams and makes an incision between them. When Packed the previous packet and sealed the bottom of the next package. When a new packet is generated, the machine instructs the dispenser to discharge the dose. The dispenser puts/pours dose products through the cone into the prepared package. Simultaneously, there is a drawing package to the desired length. The length is controlled by photomatt, which is printed on the film or on the parameters of the packet length without photo tags specified in the controller machine. After filling with product and transport package, the machine gives the command and the node horizontal jaws starts next automatic cycle - Packed the previous packet and sealed the bottom of the next package. When used without a dispenser, the product is fed manually or with the help of special devices, and starting the cycle of the machine is the triggering of the sensor product or pedal/button start. When working with dispenser automatic cycle is started when the previous packet and the dispenser is ready to unload the next dose. The performance of the machine depends mainly on the performance of the dispenser. Therefore, the choice of dosing should be guided by the type of Packed products, maximum dose, maximum packet size and the desired performance.
Operator: the Operator falls asleep or controls the filling of the product hopper. Sets the film and sets up the formation of the package. Sets the panel control unit dose, and other variables. Fold the finished packs in bulk packaging.
Design features: the parts in contact with product are made of materials that are allowed direct contact with food products. Frame, structural elements and cladding can be made of stainless steel, and conventional construction painted steel. In the basic configuration of acetotartrate drive elements are pneumatic cylinders. This provides control of the process, easy maintenance and low cost. But for such a machine need compressed air, i.e. the compressor. Also it is possible to manufacture machine with mechanical drive instead of pneumatic.
1. Film width 420 mm maximum, respectively, the maximum width of 200 mm
2. The maximum packet length 300 mm
2. The maximum dose of 2 kg or 3.5 liters (dm3)
3. Speed mechanical to 35 pack/min (2100 UE/h)
Video on this machine:
Country of origin Ukraine
Batching limit 2000.0 (g)
Maximum performance 35.0 (PCs/min)
Regulation of the heating temperature soldering site Yes
The changing volumes of the "glasses" of the dispenser Yes
The amount of dose 3500.0 (CC)
The minimum packet length 50.0 (mm)
The minimum width of the package 70.0 (mm)
The maximum packet length 300.0 (mm)
The maximum width of the package 200.0 (mm)
The packaging material of the multilayer film, polypropylene, polyethylene, double-layer film, the film with two layers of polypropylene, polypropylene-polyethylene film, of a film with two layers of polyethylene, polymer film
The diameter of the roll 450 (mm)
Power consumption 1.8 (kW)
Air flow 300.0 (liter/min)
Network settings
Voltage 220.0 ()
Frequency 50.0 (GHz)
General settings
Length 1400.0 (mm)
Width 1000.0 (mm)
Height 2400.0 (mm)
Ordering information
Price: 71 280 UAH.