Complete transformer substation for outdoor installation with transformer 2 ktpn-25...1000/6 (10)/0,4

KTP outer installation with transformer 2 ktpn-25...1000/6 (10)/0,4 is a mobile construction made in a high degree of readiness for operation, that greatly facilitates the mounting work. Access for maintenance is provided through the doors on the facade to the distribution device high (HVSG) and low-voltage transducer and rear doors in the transformer compartment.

In front of the right posted by low voltage switchgears and is a built-in cell CSR-393 with switch load VNA-RFP which connects an external power KTP. The cell door CSR-393 has a viewing window for review of internal parts without removing the voltage. From the load switch VNA-PO tire CENTURIES (isolated heat shrink insulation) voltage is applied to the power transformer.

Then, from the power transformer also tires LV voltage of 0.4 kV low voltage switchgear. RUNN made in the form of panel lying and mounted in front of the ktpn left.

On the facade RUNN posted by 3 doors and devices to control voltage and current. On the left door is the equipment (electricity meter, the switch control voltage, automatic the switch control circuits, lighting and so on), behind the door are the starter, step-down transformer (OSM-0,25). For right door is main switch D and the current transformers type T-0,66 M U3.

The lower door are linear automatic switches VA or connected RBK fuse

In the rear compartment ktpn is transformer with earthed neutral.

The installed capacity of the power transformer kVA 25 - 1000;

Rated the voltage on the HV side, kV 6 - 10;

Rated the voltage on the low voltage side, kV 0,4 - 0,23;

The number outgoing lines in the questionnaire

shipments by region (495) 720-70-42; 903-720-70-42 ; 8-903-6471471 http://www.electromarcet.EN Electromarket