Pipe reinforced plastic for water supply and sanitation.
| Company: | OOO "FPG Metalpromresurs" |
| Seller: |  Sorokin Konstantin Alekseevich |
| Phones: |  +38 095 122 06 52 Show phone |
| Address: | Ukraine |
Sell reinforced polyethylene pipes for water supply and sanitation.
Water pipes reinforced with steel wire from grade polyethylene (PE-80.
The range of nominal diameters installed from 90 mm to 630 mm with major operating pressures of 1.0 to 2.5 MPa. The color of the pipes should to be black with blue marker bands. Pipes made of polyethylene low pressure high density (HDPE), available in straight stretches with fixed length 12m. The consumer's specifications by the factory manufactures the pipe pieces to any other length.
In situ hydraulic the tests have proved that the increase in strength of the pipe for diameters 90 ÷ 250 mm 5 times, and for diameters 315 ÷ 630 mm 2.5 ÷ 3 times. Polymer reinforced water tubes work well when water hammer, keeping their options and quality.
The range of nominal diameters installed from 90 mm to 630 mm with major operating pressures of 1.0 to 2.5 MPa. The color of the pipes should to be black with blue marker bands. Pipes made of polyethylene low pressure high density (HDPE), available in straight stretches with fixed length 12m. The consumer's specifications by the factory manufactures the pipe pieces to any other length.
In situ hydraulic the tests have proved that the increase in strength of the pipe for diameters 90 ÷ 250 mm 5 times, and for diameters 315 ÷ 630 mm 2.5 ÷ 3 times. Polymer reinforced water tubes work well when water hammer, keeping their options and quality.
Corrugated multilayer reinforced pipes for SEWAGE TU B V. 2.7-22.2-34685512-001:2012
Corrugated the pipe has a smooth inner the surface of the yellow color, which allows quality video diagnosis. And profiled wall containing steel insert, not contact neither with the transported medium, nor with the ground. This design profile provides increased ring hardness of not less than 20kn/m2 by reducing the overall weight of the pipe. The diameter of the produced reinforced pipe from 300 to 800 mm reinforced Polymer non-pressure sewer pipe have the ability to deform to 3 % with the return to form continues after removing the load and retain the geometry of the interior of the tube. Further the load increases there is a change in shape of pipe, but the integrity of the internal parts of the remains.
