Optimum TU 3008 Vario (optimum Tu 3008 Vario) lathe metal lathe-cutting .

*Stand in the photo machine in the machine tool kit is not included and sold separately.

Description Optimum TU 3008 Vario:

• Automatic longitudinal and cross! feed.
• Adjustment of spindle rotation speed - smooth, stepless, comfortable, with a crank on the front.
• Brushless DC motor.
• Digital readout of the rpm of the spindle on the front panel.
• Wide range of spindle rotation speed as a very low 30 rpm./min. and high to 3000 rpm./min.
• This lathe features ground and hardened spindle, which allowed the manufacturer to concentricity of less than 0,009 mm and runout of the Chuck less than 0.04 mm.
• Allows guaranteed to provide precision machining for a long service life — hardened cast iron frame with numerous ribs, ground prismatic guide and prudently set manufacturer — volute casing screw.
• If necessary, an emergency stop of the machine, conveniently located emergency stop button.
• Equipped with automatic longitudinal and cross feeding direction does not depend on the direction of rotation of the spindle.
• Division of limbs: transverse carriage of the caliper of 0.04, the upper carriage of the caliper is 0.01; the tailstock quill handwheel 0.02 mm.
• Metric and inch threads in wide range.
• The choice of feed rate and step cut thread handle (in the range).

Specifications Optimum TU 3008 Vario:

Электропитание230 V ~50ГцДвигатель1,5 cutnarski cone шпинделяМК5Присоединительная surface шпинделяCamlock DIN ISO 702-2 Nr. 4Диаметр through hole шпинделя36 Maksimalna height of the holder резца25 mvista центров150 meganthropus расстояние720 mmdiameter treatment over станиной300 mmdiameter treatment over суппортом180 mm станины180 MASCOTA rotation шпинделя30 — 3.000 rpm minoritiesto ступеней5, bestvintage upper carriage суппорта65 mhad the transverse carriage суппорта150 mertola подача0,085 — 0,832 mm/opopaea подача0,01 — 0,1 mm/step opredeli cut metric резьб0,2 — 3,5 mm/opredeli step резьб56 cut into inch — 8 threads per dimunutive taper tailstock rear tailstock rear babkirk 3Перемещение бабки70 megabrite размеры1.500 x 720 x 690 Massa станка260 kg

Supplied Optimum TU 3008 Vario:

1. 3-jaw Chuck 160 mm.
2. Centers resistant MK 3 and MK 5.
3. A set of replacement gears for guitar.
4. Kit maintenance tool.
5. The user's manual.

On all equipment warranty 1 year, provide services for warranty and post-warranty service.

Go to lathes for metal