Buy compressor 4вм10-120\9 with storage, Boo, illiquid, parts 4вм10-120\9

Buy compressor 4вм10-120\9 with storage, Boo, illiquid, parts 4вм10-120\9

Piston compressor unit 4ВМ10-120/9, 4ВМ-10-120/9 used on large and medium stationary compressor stations for compressed air. She is a boxer crosshead machine on the base of compressors 4VM10-120/9-cylinder double-action, console-mounted electric motor. Interstage located on the car, and two buffer tanks for suction and discharge, located under the cylinders.

Description compressor 4ВМ10-120/9, 4ВМ-10-120/9

Compressor 4ВМ10-120/9 (4ВМ-10-120/9) has a system of automatic control of the main parameters signaling and blocking, and speed automatic control system performance.

The volume of Assembly works is minimized, and the use of special conservation allows the start-up of the compressors without removing it, which significantly reduces the commissioning of compressors in operation.
Used in the manufacture of compressors 4ВМ10-120/9 (4 WM 10-120/9) special equipment ensures high precision and interchangeability of parts.
Fabrication and layout of the compressor to meet the requirements of technical aesthetics and modern technology.
Automatic compressors 4ВМ-10-120/9 provides the opportunity to reduce staff to a minimum, and the simplicity of the control Assembly does not require special training of personnel

Compressor 4ВМ10-120/9 have consumption reduced water consumption, thanks to the improvement of the mechanism of motion, the dynamics of the compressor and the use of direct-flow valves.
Boxer performance compressors VM-120/9 allowed to achieve mutual balance piston and inertial forces. operating in the opposite ranks, greatly enhance the speed, reduce the weight of the compressor and Foundation.
Application in plain bearings thin-walled liners ruled out fitting work when laying shaft, the need restringing and adjustments in the process of operation, increased bearing life.

Equipment compressor 4ВМ10-120/9 (4ВМ-10-120/9)

1. Compressor 4ВМ10-120/9 (4ВМ-10-120/9)
2. The motor
3. Check valve
4. Anchor bolts
5. Pathogen
6. Control panel
7. Assembly lubricant
8. Refrigerator 1 tbsp.
9. Refrigerator end
10. Valves PEAK (set)
11. The buffering capacity of the suction
12. Buffer tank discharge

the compressor characteristics 4ВМ10-120/9 (4ВМ-10-120/9)

Model

Gas

Pressure, kg/cm2

Output, m3/min

Powerful., kW

Envelope. dimensions, mm

Weight

D

W

In

4ВМ10-120/9

the air

9

124,5

800

5180

4430

3000

17080

Performance under the condition of suction, m3/s
Absolute pressure, MPa:
vsasyvanie
discharge
Piston stroke, mm
The number of cylinders
Diameter of cylinders, mm
I cycle
Level II
Rod diameter, mm
Power consumption (under standard conditions), kW
Cooling water consumption at 288K (15 ° C) at the inlet , m3/s
Rotation frequency, s-1
Stage automatic capacity control, %
Overall dimensions , mm
The crane's load capacity, kg:
for the installation (compressor Assembly)
to repair (shaft with rotor)

2,075 (+15% -5%)

0,1
0,9
220
4

620
370
60
666
0,00382
10
100-75-50-0

5180х4430х3000

12900
2640

spare parts and repair of compressor 4ВМ10-120/9, 4ВМ-10-120/9