Gasket AP, AP-31, APR-31, AC, PL, PP, of the AFL,AGI, CKD-31

Gasket APR-31 Asbestos braided gland fat, saturated with oil and graphite with brass wire in the Bay of 10 kg.
Neutral and aggressive liquid and gaseous media, petroleum products

Gasket AP-31 Asbestos braided gland fat, saturated with oil and graphite in the Bay of 10 kg,4-32mm

Used asbestos packing AP-31 in the gland seals, valves, reciprocating and centrifugal pumps..

Gaskets AC asbestos
Maximum valid for gaskets AC pressure level is 4.5 MPa at a temperature up to 400C.

Gasket AGI Asbestos inhibited in the Bay of 10 kg.

The gasket of the AFL is a square assesor section impregnated with aquadag fluoropolymer. Twisted asbestos gasket thread.

Gasket CKD-31- woven, cotton, saturated fat antifriction composition based on an oil extracts, graphitized.

Gaskets PL, and PP are used to seal and sealing of various systems and mechanisms for filling gland cells in pumps and units.

Best price in the region!

Gasket AP-31

Asbestos braided gland fat, saturated with oil and graphite in the Bay of 10 kg.
Used asbestos packing AP-31 in gland seals of valves, piston and centrifugal pumps. In this case, operation of valves and pumps can be characterized by aggressive influences, neutral, gaseous media and steam at a pressure of 4.5 MPa and the range temperature -70°C - +300°C, and in contact with the oil pressure level is not exceed 2 MPa, at temperature not more than 250°C.
Neutral and aggressive liquid and gaseous environment, couples
Petroleum products

Gaskets AC dry asbestos
The maximum allowable for gaskets AC level pressure is 4.5 MPa, at temperatures up to 400C. Subject to the impact environments gaseous and liquid ammonia, the pressure should not exceed 4.5 MPa and a temperature range not to go for a mark from-70C to + 150C.

Gasket APR-31 Asbestos braided gland fat, saturated with oil and graphite with brass wire in the Bay of 10 kg.
Neutral and aggressive liquid and gaseous environment, petroleum products

4-32mm