Mesh Netting with polymeric coating (PVC)
Offer type: salePublished: 01.02.2018
| Price: | negotiated |
| Seller: |  Stefashko Nazar |
| Phones: |  0632600076 Show phone |
| Address: | Ukraine, L'vivs'ka Oblast', Lviv |
Mesh Netting with polymeric coating (PVC) popular in the construction of fencing, garden plots, animal enclosures, fences, sports and children's playgrounds. They can also be used for railway, airport, port.
Mesh Netting with a PVC coating - ideal for areas with high humidity, salt, high alkalinity or high content of acid.
The braided mesh single manufactured by plexus in one perepevku flat spirals of steel wire of round section covered with PVC protective coating in green.
The ends of coils on both sides in the junction are bent to its spiral.
Mesh Netting with PVC coating is not destroyed, because the wire is interwoven, not welded.
Often this grid is trying to do with the use of conventional tools, which leads to cutting of the polymer coating on the inner surface of the spirals. There the water falls, and this mesh Netting with polymeric coating quickly progni inside.
If you choose a mesh Netting with polymeric coating, then pay attention to the inner surface of the spirals of the mesh, there should be no scratches or damage.
Mesh Netting with a PVC coating - ideal for areas with high humidity, salt, high alkalinity or high content of acid.
The braided mesh single manufactured by plexus in one perepevku flat spirals of steel wire of round section covered with PVC protective coating in green.
The ends of coils on both sides in the junction are bent to its spiral.
Mesh Netting with PVC coating is not destroyed, because the wire is interwoven, not welded.
Often this grid is trying to do with the use of conventional tools, which leads to cutting of the polymer coating on the inner surface of the spirals. There the water falls, and this mesh Netting with polymeric coating quickly progni inside.
If you choose a mesh Netting with polymeric coating, then pay attention to the inner surface of the spirals of the mesh, there should be no scratches or damage.
