Description compressor
 
        Compressor 2ВМ4-54/3C, 2ВМ-4-54/3C stationary, piston, crosshead, single stage reciprocating water-cooled without lubrication of cylinders and seals eliminates the ingress of oil into the air. 
        In compressors without lubrication of cylinders oil system the pressure oil flow to the cylinders and sealing devices are not provided. Lubricators are not available. The pistons of these compressors have the support and the split ring of self-lubricating material based on PTFE with different fillers. To prevent the ingress of oil from the frame into the cavity of the compression, each cylinder compressors without lubrication of cylinders is provided with a lantern, maloletak sealing device, maslootboynika and mukoliticeski rings. 
        The actuator is made from two-speed asynchronous motor type А2К85/24-8/16УХЛ4 built into the frame of the compressor. 
        The compressor is equipped with automatic protection and alarm functions for main parameters. 
       
      
        
      
      
        Specifications 2ВМ4-54/3C,2ВМ-4-54/3C
 
       
      Compressor 2ВМ4-54/3C, 2ВМ-4-54/3C  
      Gas compressed air
      The frequency of rotation of the motor shaft, Rev/min 750
      Volumetric capacity reduced to suction conditions, CC/m in 54 min.
      Pressure ATM. abs.: Initial atmospheric
      			 The final 3
      The initial gas temperature deg. From -25...+35
      The shaft power of compressor kW. 158
      Cooling water consumption without limit when the inlet temperature of +15 deg. S. (est.) l/min 27
      Consumption of oil for lubrication of the cylinders, g/h -
      The amount of oil filled in the frame of the compressor l 100
      Weight of compressor, kg 3630
      
        
      
      The motor
      	 
      Type А2К85/24-8/16УХЛ4
      Power, kW 160
      Voltage, V 380
      
        
      
      Installation
       
      Weight as delivered, kg 4250
      Overall dimensions, l x W x h/mm 3650/1500/1070