Bizator  /  Adverts  /  equipment and materials  /  materials  /  miscellaneous

Permanent formwork SHIELDJOINT for device expansion joints concrete floor tobacco factory

Offer type: salePublished: 15.01.2015
Seller:Vasil'chuk Denis Valentinovich
Phones:
Show phone
Write a message
Address:Russian Federation, Leningradskaya Oblast', Saint-Petersburg
SHIELDJOINT innovative permanent formwork (rail) form and transfer system load. It helps builders to quickly and accurately perform a flat concrete industrial floors in the premises of factories, logistics centers and warehouses, shopping malls and Convention centers, Parking garages and Parking lots.
Conventional formwork systems have two straight steel profile, which is bound to the edges of the floor plates and generally ensure their protection. Since the floor plate during the curing process shrinks, there is a gap between adjacent plates. After 12 months, the gap is filled with a sealant. As necessary, he repaired during the entire life of the building, in order to maintain the required sealing seam. The seal is expensive and the tightness of the joints must be saved so that they work effectively.
Handling equipment such as forklifts, crosses the seam and shock generated between the secured edges of the plates and the wheels of the truck, even if the sealant in place. These loads are absorbed by the floor plates and a lifting-transport equipment, which leads to the repair of floors with concomitant delays and high costs for maintenance.
SHIELDJOINT consists of an asymmetric top plate" installed on "opposite asymmetric angles of support." This patented innovation allows sealed seam on all the time, so that the sealant is not required.
Feature SHIELDJOINT in "asymmetric top plates in their specific trapezoid line of the seam opening, designed with a wavelength suitable for the narrow width wheel loaders, even at maximum opening of the seam 30 mm, wheel loading and transport equipment are always in contact with both halves of the plates. This reduces to almost zero impact loads during the passage of the seam.
SHIELDJOINT significantly reduces the cost of the repair of the floor during the entire life of the building, reduces the downtime associated with repairs joints and significantly reduces maintenance costs of loading and transport equipment as a result of shock loads.
SHIELDJOINT has a unique, revolutionary asymmetric dowel.
Most of formwork systems are designed so that the dowel with a closed seam is located symmetrically across the joint. When the seam is disclosed, the engagement of the dowel with the floor plate on the free side is reduced. Violated the uniform engagement of the dowel with both sides of the seam. In the end, when the big revelation of the seam, there is a risk of total loss of adhesion of the dowel with the floor plate.
SHIELDJOINT works differently. When the seam is disclosed, SHIELDJOINT provides equal interaction dowels on both sides. Even at maximum disclosure seam 30 mm, on each side of the seam remains 60 mm dowels. The anchors are manufactured from high quality steel S355 (N/mm2 yield strength).