Homag edge banding machine for softforming used
Offer type: salePublished: 10.01.2013
| Seller: |  Vebim Stanki |
| Phones: |  003256365180 Show phone |
| Address: | Kingdom of Belgium, Antwerp |
No. stancak-304-003042
НазваниеHOMAG
Modelertm KL 78 / E 12
Year technology.2002
Напряжение400V 50Hz 3Ph
Technical characteristics:
Single - sided edge banding machine for SOFT-FORMING
- The following operations: milling and pasting the soft forming straight edges of the blanks for furniture.
- Feed speed (chain): 12 - 24 m/min
The upper clamping the workpiece is carried out by means of the lock strap
- The distance between the blanks: 50 mm
- Thickness profile (top) max 20 mm
- Thickness profile (bottom) max 15 mm
The thickness of samples blanks: 7 - 60 mm
- Edge facing material in strips from an array of 0.4 - 12 mm, in coils, of 0.3 to 3 mm
The equipment of the machine:
- Elongated chain + upper clamping rollers designed to automatically download
- Input adjustable guide
Spray for separation (top and bottom)
- Scoring saw and afplataggregaat, 2 motor 1 HP
- Universal milling unit 2 motor 3 kW
- Retaplase unit QE 34, pasting the edges of the workpiece or facing edges
- Edging unit 1 roll and strips from an array
- 4 times the area of the clamp, straight and SOFT
- Trimming unit HL05, straight or angled, 2 engine 0,4 kW
Milling unit (pre-milling removal of overhangs), 2 motor 1.5 kW
Milling unit (finish milling removal of overhangs), 2 engine 0,4 kW
The knife roller (bases)
The knife roller (bottom)
Polishing unit with oscillation
while production in Belgium (available immediately)
НазваниеHOMAG
Modelertm KL 78 / E 12
Year technology.2002
Напряжение400V 50Hz 3Ph
Technical characteristics:
Single - sided edge banding machine for SOFT-FORMING
- The following operations: milling and pasting the soft forming straight edges of the blanks for furniture.
- Feed speed (chain): 12 - 24 m/min
The upper clamping the workpiece is carried out by means of the lock strap
- The distance between the blanks: 50 mm
- Thickness profile (top) max 20 mm
- Thickness profile (bottom) max 15 mm
The thickness of samples blanks: 7 - 60 mm
- Edge facing material in strips from an array of 0.4 - 12 mm, in coils, of 0.3 to 3 mm
The equipment of the machine:
- Elongated chain + upper clamping rollers designed to automatically download
- Input adjustable guide
Spray for separation (top and bottom)
- Scoring saw and afplataggregaat, 2 motor 1 HP
- Universal milling unit 2 motor 3 kW
- Retaplase unit QE 34, pasting the edges of the workpiece or facing edges
- Edging unit 1 roll and strips from an array
- 4 times the area of the clamp, straight and SOFT
- Trimming unit HL05, straight or angled, 2 engine 0,4 kW
Milling unit (pre-milling removal of overhangs), 2 motor 1.5 kW
Milling unit (finish milling removal of overhangs), 2 engine 0,4 kW
The knife roller (bases)
The knife roller (bottom)
Polishing unit with oscillation
while production in Belgium (available immediately)
