The technical plates TMCs, MBS, AWS GOST 7338-90
Offer type: salePublished: 01.04.2015
| Price: | 10 UAH |
| Seller: |  Luk'yanenko Sergej |
| Phones: |  (056)794-87-04 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Intended for the manufacture of rubber products, which are used for static seals, prevent friction between the metal surfaces, for the perception of single shock loads, and as linings, floorings and other sealing compounds.
Tmcm - talonrakentamisessa;tmksch plate, MBS, AMC thickness from 1 to 20 mm is used for the manufacture of rubber products that are used to seal knots, working under pressure above 1 MPA (10 kg/cm2, 10 ATM);tmksch plate, MBS, AMC thickness from 1 to 60 mm intended for the manufacture of rubber products that are used to seal knots, working under pressure to 0.5 MPA (5 kg/cm2, 5 ATM), to prevent friction between the metal surfaces, and also for the perception of single shock loads or as linings, floorings.manufactured vulcanized in molds for vulcanizing presses, thickness from 3 to 80 mm., size 250*500 mm, 500*500 mm 720*720 mm rubber plate, one or more fabric layers (for every 2 mm of the plate should be no more than one layer of tissue).;;.The plates TMCs, MBS, AMC, depending on the purpose, structure and method of manufacture of the following release:
brands:
AMC - weathering-resistant (limited ozone);
MBS - oil and petrol resistant.
classes:
class 1:
class 2:
types:
The f - shaped plate TMCs, MBS, AMC:
N - unshaped (roll plates TMCs,MBS, AMC:
manufactured by extruding rubber composition through a Spinneret and subsequent vulcanization without forms in boilers, as well as on the continuous vulcanizing operation, the thickness is from 1 to 20 mm., width 800, 1200 mm, length 1200 mm.
types:
type I:
rubber technical plates (brand TMCs, MBS, AMC);
type II:
degrees of hardness TMCs, MBS, AMC:
M - soft: (shore hardness 35-50 units)
C - average: (shore hardness 55-65 units)
T - increased: (shore a hardness of 70-80 units)
brands:
AMC - weathering-resistant (limited ozone);
MBS - oil and petrol resistant.
classes:
class 1:
class 2:
types:
The f - shaped plate TMCs, MBS, AMC:
N - unshaped (roll plates TMCs,MBS, AMC:
manufactured by extruding rubber composition through a Spinneret and subsequent vulcanization without forms in boilers, as well as on the continuous vulcanizing operation, the thickness is from 1 to 20 mm., width 800, 1200 mm, length 1200 mm.
types:
type I:
rubber technical plates (brand TMCs, MBS, AMC);
type II:
degrees of hardness TMCs, MBS, AMC:
M - soft: (shore hardness 35-50 units)
C - average: (shore hardness 55-65 units)
T - increased: (shore a hardness of 70-80 units)
