The technical plates MBS rubber, TMCs, AWS GOST 7338-90
| Price: | 25 UAH |
| Company: | ChPF 'Gejzer plyus' |
| Seller: |  Pavlenko Aleksandr |
| Phones: |  38-095-840-11-02 Show phone0638764172 Show phone |
| Address: | Ukraine, Kyiv Oblast', Bila Tserkva |
The technical plates MBS rubber, TMCs, AWS GOST 7338-90 (RUSSIA, UKRAINE, China)
application send to our mail oleksandrpavlenko@yandex.ru or tel.+380958401102
No.
Name
Od.
Many
Full
1
MBS-1mm the roll templestone
kg
1,000
70,00
2
MBS-C-10 templestone sheet (Hm)
kg
1,000
50,00
3
MBS-P-2 the roll templestone
kg
1,000
55,00
4
MBS-With-3 templestone roll
kg
1,000
55,00
5
MBS-P-4 the roll templestone
kg
1,000
55,00
6
MBS-P-5 the roll templestone
kg
1,000
55,00
7
MBS-C-6 the roll templestone
kg
1,000
55,00
8
MBS-C-8 the roll templestone
kg
1,000
55,00
9
Tmcm-1.5 mm the roll templestone
kg
1,000
30,00
10
Tmcm-10mm the roll templestone
kg
1,000
25,00
11
Tmcm-12mm templestone sheet (Hm)
kg
1,000
25,00
12
Tmcm-16mm templestone sheet (Hm)
kg
1,000
25,00
13
Tmcm-20mm 500X500 vibration TO 376-82
kg
1,000
35,00
14
Tmcm-30mm templestone sheet (Hm)
kg
1,000
25,00
15
Tmcm-With-10 templestone sheet (Hm)
kg
1,000
25,00
16
Tmcm-With-2mm the roll templestone
kg
1,000
25,00
17
TMCM-P-3 the roll templestone
kg
1,000
25,00
18
Tmcm-With-4mm the roll templestone
kg
1,000
25,00
19
Tmcm-With-5mm the roll templestone
kg
1,000
25,00
20
Tmcm-With-6mm the roll templestone
kg
1,000
25,00
21
Tmcm-With-8mm the roll templestone
kg
1,000
25,00
Mark "AMC" - weather-resistant GOST 7338-90
- designed for the manufacture of rubber products, which are used for static seals, pressure to 0.1 MPa, prevent friction between the metal surfaces, for the perception of single shock loads, and as linings, floorings and other neoplatonically compounds.
Working environment: atmospheric air, spaces, containers, vessels, nitrogen, inert gases at a pressure of from 0.05 to 0.4 MPa or oil and fuel oil based gasoline at a pressure of from 0.05 to 10.0 MPa. Working temperature -30 °C to +80 °C.
Mark "MBS-With - oil-resistant, medium-hard: the air spaces, containers, vessels, inert gases at a pressure of from 0.05 to 0.4 MPa or oil and fuel oil based gasoline at a pressure of from 0.05 to 10.0 MPa; nitrogen.
It is possible to supply techplast with the degree of hardness of M (soft) and T (high), as well as rubber inserts brands TMCs and MBS with one or more fabric layers
