Set RTI for repair of transformer TM, TMG, TMZ, TMGF 1000/10(6)
Offer type: salePublished: 17.02.2022
| Seller: |  Kudryashev Andrej |
| Write a message | |
| Address: | Russian Federation |
Use REPAIR kit transformer is recommended for the repair of the transformer or audit (both internal audit and external audit of the transformer). You can also use REPAIR kit transformers when conducting standard (mandatory) procedures for pulling bolts.
Part REPAIR kit transformer TM, TMG, TMZ, TMP, TMVM 1000/10 includes:
1. the gasket of the under IAS insulators HV - 3 PCs;
2. the gasket of the under IAS insulators NN - 4 PCs.;
3. the sealing sleeve (ring) of IAS on insulators HV - 3 units;
4. the sealing sleeve (ring) of IAS on insulators NN - 4 pieces;
5. seal of MBS under the oil sight glass - 1 piece;
6. oil sight glass - 1 piece;
7. seal of MBS under the tank expansion tank - 1 piece;
8. the sump (transparent) - 1 piece;
9. the gasket of the MBS of the shaft of the switch - 1 piece;
10. the gasket of the MBS of the dryer - 1 PC;
11. seal of MBS under the expansion tank - 1 piece;
12. the sealing ring of the MBS overpressure valve - 1 piece
On Customer request the REPAIR KIT TRANSFORMER supplemented with spare parts:
- Transformer stripe (stripe size specified by the customer).
- Silica gel indicator of 0.25 kg
Silica XCG on thermosiphon filters and air (the number specified by the customer).
- Bracket bushings 6, 10, 35 kV.
The insulators on EXT.
The insulators on NN.
Pin (spot) clamps.
Pin input low voltage.
Pin input EXT.
Part REPAIR kit transformer TM, TMG, TMZ, TMP, TMVM 1000/10 includes:
1. the gasket of the under IAS insulators HV - 3 PCs;
2. the gasket of the under IAS insulators NN - 4 PCs.;
3. the sealing sleeve (ring) of IAS on insulators HV - 3 units;
4. the sealing sleeve (ring) of IAS on insulators NN - 4 pieces;
5. seal of MBS under the oil sight glass - 1 piece;
6. oil sight glass - 1 piece;
7. seal of MBS under the tank expansion tank - 1 piece;
8. the sump (transparent) - 1 piece;
9. the gasket of the MBS of the shaft of the switch - 1 piece;
10. the gasket of the MBS of the dryer - 1 PC;
11. seal of MBS under the expansion tank - 1 piece;
12. the sealing ring of the MBS overpressure valve - 1 piece
On Customer request the REPAIR KIT TRANSFORMER supplemented with spare parts:
- Transformer stripe (stripe size specified by the customer).
- Silica gel indicator of 0.25 kg
Silica XCG on thermosiphon filters and air (the number specified by the customer).
- Bracket bushings 6, 10, 35 kV.
The insulators on EXT.
The insulators on NN.
Pin (spot) clamps.
Pin input low voltage.
Pin input EXT.
